USB Dynamic reconfiguration register
DYN_CONFIG_EN | This bit is used to enable the dynamic re-configuration for the selected EP. If set to 1, indicates the reconfiguration required for selected EP. Use 0 for EP1, 1 for EP2, etc. |
DYN_RECONFIG_EPNO | These bits indicates the EP number for which reconfiguration is required when dyn_config_en bit is set to 1. |
DYN_RECONFIG_RDY_STS | This bit indicates the ready status for the dynamic reconfiguration, when set to 1, indicates the block is ready for reconfiguration. |